Dash Receiver & Aggregates

Traditional (Dash Receiver & Aggregate)

Structherm’s range of Dash Receiver and Aggregate provides a decorative, durable and cost effective finish applied in two stages.

The final aesthetic appearance depends on the combination of coloured dash receiver and aggregate chosen.

Dash Receiver

Dash receiver is a specially formulated polymer modified through colour render that provides excellent adhesion and impact resistance. A standard colour range is available (see below). The dash receivers should be hand applied onto an appropriate basecoat using a hawk and trowel to a thickness of 6-8 mm. Hover over the images below or click on them to enlarge.

Preview Bath dash receiver Bournemouth dash receiver Buckingham dash receiver  Cambridge dash receiver 
Ancaster Bath Bournemouth Buckingham Cambridge
Carlisle dash receiver Chester dash receiver Dover dash receiver Dumfries dash receiver Durham dash receiver
Carlisle Chester Dover Dumfries Durham
Kendal dash receiver Luton dash receiver Matlock dash receiver Oxford dash receiver Plymouth dash receiver
Kendal Luton Matlock Oxford Plymouth
Portland dash receiver Richmond dash receiver Rutland dash receiver Sandringham dash receiver Torbay dash receiver
Portland Richmond Rutland Sandringham Torbay

Dash Aggregates (Iron Free)

Our high quality decorative dash aggregates allow you to not only create classic rendered pebble dashed walls, but also some very unique styles with our wide range of colours available (see images below). The dash aggregate is thrown onto the surface of the dash receiver, whilst still wet, in an upward motion using a hand scoop. For best results an even distribution of aggregate is necessary and any missed areas should be rectified immediately as it can not be touched up next day. Hover over the images below or click on them to enlarge.

Arctic Silver 6mm   Arctic White Spar 3-8mm   Bala Spar 3-8mm   Chatsworth Spar 3-8mm
Arctic Silver 6mm
  Arctic White Spar 3-8mm   Bala Spar 3-8mm   Chatsworth Spar 3-8mm
 Hendry Spar 6mm    Multicolour 3-8mm    Red & White Spar 3-8mm    Valley Spar 3-8mm
Hendry Spar 6mm
  Multicolour 3-8mm   Red & White Spar 3-8mm    Valley Spar 3-8mm
 Calderdale Spar 3-8mm    Carlton 3-8mm    Wentworth 3-8mm    Windsor 3-8mm
Calderdale Spar 3-8mm   Carlton 3-8mm   Wentworth 3-8mm   Windsor 3-8mm
 Alba Harvest Gold 3-8mm    Alba Spar 3-8mm    Balmoral 3-8mm    Caledonian Harvest 3-8mm
Alba Harvest Gold 3-8mm   Alba Spar 3-8mm
   Balmoral 3-8mm
  Caledonian Harvest 3-8mm
 Gower 3-8mm    Ashton Cream 3-8mm   Buff Quartz 3-8mm     Iris 3-8mm
Gower 3-8mm   Ashton Cream 3-8mm   Buff Quartz 3-8mm   Iris 3-8mm
Yellow Cream Quartz 3-8mm   Beige Marble 6mm    Durite Canterbury Spar 3-8mm    Honey 6mm
Yellow Cream Quartz 3-8mm   Beige Marble 6mm
  Durite Canterbury Spar 3-8mm
   Honey 6mm

Please note we do not supply our Dash Aggregates for landscaping or domestic projects. We do not hold stock and they are only sold through our network of Registered Installers as part of a full insulated cladding system for commercial projects.


Featured Project

Wauchope and Greendykes

The City of Edinburgh Council has numerous high rise blocks built in the 1960’s and 70’s, two of these blocks were Wauchope House and Greendykes House. Construction of both blocks was carried out by Cruden Ltd in 1966 and contain 86 flats each over 15 storeys.


John McPake – Technical Sales Manager - Scotland

Leading construction specialists Structherm have employed a new Technical Sales Manager for Scotland, who will be travelling across the country to meet new customers.